Ericomp PCR Machine Guide
Get familiar with the ERICOMP PCR Machine and learn how to set up and run PCR programs with this quick-start guide.
Designed to complement the manufacturer's manual, this walkthrough takes you through the machine's menu, programming modes, and step-by-step instructions for creating a new thermal cycling protocol or running an existing one.
You'll learn how to configure temperature settings, set incubation times, program repeated cycles, and select the correct tube and reaction volume options. Whether you're using the machine for the first time or need a quick refresher, this guide will help you navigate the essential functions and get your PCR experiments running.
Introduction
This guide is not meant to be a replacement but meant to accompany the company guide book. It can be used as a quick guide for how to use Ericomp PCR machines.
Step: 1
Entering Program Mode
To enter a new program, or run an existing program, follow these steps:
Turn on the machine using the button on the left. The following screen should appear:
Press “0” to go to the next screen.
Press “6” to go to program modeю
Press “2” to go to basic mode.
Press “0” to select menu.
Press “2” to enter a new program or press “1” to run an existing program (if you’ve already entered one).
Step: 2
Creating a New Program
Hit “1” for a new program.
Choose 1 for temperature:
Use arrows to navigate to minutes.
Choose 1 for temperature:
Select 2 for goto:
Choose 1 for temperature:
Step: 3
Confirming and
Running the Program
Enter to confirm.
1 to run program.
1 for tubes.
2 for 50ul.