How to Pipette
Learn how to use a micropipette with confidence, from understanding its key components to accurately measuring and transferring liquids.
This step-by-step guide covers the three plunger positions, volume adjustment, choosing the correct pipette tips, and proper liquid handling techniques.
You'll also learn how to avoid common mistakes like air bubbles, inconsistent samples, and contamination to ensure greater accuracy and consistency in your experiments.
What You'll Learn
Learning to pipette is very important to all of your research projects. Your experiments depend on the accuracy of you and your device.
The pipette in this protocol measures units in microliters (abbreviated uL) (there are 1000 microliters in a mL or milliliter).
Pipette Sizes and Tips
Pipettes come in various capacities, and the pipette we are using for this walkthrough is a 200-1000uL, yours may be different, but the information is transferable.
When finding the correct pipette tips(a disposable tip made for single use) you use the higher number on the device to identify its size.
200-1000 is a 1000uL device.
LESSON: 1
Thumb Plunger
There are 3 stages to the plunger:
Warning:
LESSON: 2
Measurement Dial
LESSON: 3
Transferring Fluid
from One Vessel to Another
Retrieve tip from box by inserting the tip holder into the open end of the tip.
Warning:
Transferring quantities of product. Take tube with product and tilt at angle to better see what you are doing.
Press thumb plunger down to Desired Measurement (fig.2) and dip tip far enough into product for retrieval.
Warning:
Slowly depress thumb plunger while slowly moving tip deeper into fluid. This prevents the mistake of retrieving an air bubble. Air bubble means accuracy is questionable.
Warning:
Examples of Bad Sample
and Consistent Sample
Place tip in transfer vessel and press thumb plunger til you reach Full Discharge position often even pressing a couple of times to get all of it out remaining outside previously discharged fluid so that you don’t suck it up on the depress.
When finished press the Tip Ejector while aiming it at a waste can for the used tip to land into.